Page 18 of 139

Re: V6 into a RHD Chrysler Neon mk1

Posted: Sat Aug 13, 2011 9:13 pm
by Mitsuru
I'm having a couple more days rest to recuperate from a series of falls! (all on the same day)
With the rain and fog a wooden ramp which I use as access was very slippery.
So A landed badly and onto my bag breaking my reading glasses.
Also I forgot to get the piping so I will get that monday.

Re: V6 into a RHD Chrysler Neon mk1

Posted: Mon Aug 15, 2011 7:45 pm
by Mitsuru
The Fuel filter/regulator on the pump assembly

Image

Oh and an email to say they have the correct one ordered and
1) it' made and coming from Italy
2) it well be a further £30 on top of what I've already paid.

The brake and fuel pipes are in but are not clipped in,
so they will be later.

Image

Image

Re: V6 into a RHD Chrysler Neon mk1

Posted: Tue Aug 16, 2011 10:18 pm
by Mitsuru
My friendly mechanic Dean came over to giveme a hand with my brake pipes.
We found a little problem!

Image

On the left is what we get as standard over here, the one on the right is off the car!

Image

Dean managed to reuse the ones on the abs pump, but the ends on the brake
hoses are too far gone. Thats new brake hoses needed.
I've asked a auto parts shop to get me the hoses, they said could be thursday/friday.

Image

Dean has said he will call back over and sort the brake hoses & lines out when I get them.

Re: V6 into a RHD Chrysler Neon mk1

Posted: Wed Aug 17, 2011 6:10 pm
by Mitsuru
Ordered new brake hoses
Front £11.70 each
Back 17.70 each

Add the extra for the fuel filter £30
The 1st payment on the car insurance
I'm broke!!!!

Re: V6 into a RHD Chrysler Neon mk1

Posted: Sat Aug 20, 2011 7:37 pm
by Mitsuru
I've had the drill out and been clipping the copper pipe work.

Image

Image

Image

Image

Image

I just need to re-clip the lpg pipe, the cables for the abs sensors,
and the lpg fuel level sensor will be ran inside the car.
Depending on the weather I might do that tomorrow.

Re: V6 into a RHD Chrysler Neon mk1

Posted: Wed Aug 24, 2011 9:13 pm
by Mitsuru
Only a little done on the car today, due to a reaction to meds over the past few days.
The LPG pipe has been re-clipped back under the car, and all the wiring which would
normally run under the car has been taken through the hole the power and fuel tank
level sender sensor goes through.
(no pictures)

If I can get the fuel pump out I can clean the grit filter out before the tank can go back.
I'll ask dad to do losen the holding nut off tomorrow night.

Remember I said the front brake hoses were about £11 each and the back about £17
each, I called the car parts store to see if they finally got them.
They got them but they are over £25 + tax. They are holding them for me!

Re: V6 into a RHD Chrysler Neon mk1

Posted: Thu Aug 25, 2011 5:33 pm
by Mitsuru
My father has agreed to remove the locking ring holding the fuel pump in.
Nothing done today, as I was at the hospital having diabetic eye screening.
I have been given the all clear for another 6 months so no more lazer treatment.
Normal service (or what passes for it) will resume tomorrow (weather permitting) :blush:

Re: V6 into a RHD Chrysler Neon mk1

Posted: Tue Aug 30, 2011 8:22 pm
by Mitsuru
I thought it best to remove the fuel filler pipe,
so the remnants of the rubber connecting pipe
could be removed. There were only 3 screws
at the top holding it on.

Image

Image

Image

Not nice looks like more money and a new one!

Re: V6 into a RHD Chrysler Neon mk1

Posted: Wed Aug 31, 2011 8:36 pm
by Mitsuru
Th fuel tank went back in but will have to come back out again tomorrow.
I couldn't get the plastic quick release bit into the fuel hose!
The hose was a nice tight fit onto the fuel line.
And I can't find my lpg parts which could solve the problem.
BUGGER!!!!! it's always one step forward and two steps back!

I have given myself a target date to get Christine back on the road.

Image

Image

Do you think I'm aiming too high?

Re: V6 into a RHD Chrysler Neon mk1

Posted: Thu Sep 01, 2011 11:19 pm
by Mitsuru
Second hand fuel filler neck the usa rather than a new one.
I have managed to get a ebay seller in Goodlettsville, Tennessee.
To sell me one and ship it to the UK for $45 +$60 shipping
From amount £66.59 GBP To amount $105.00 USD
Exchange rate: 1 GBP = 1.57681 USD

Thats one problem solved! whats next?