Accelerator Pump

Post your technical queries / problems here!
Post Reply
Message
Author
User avatar
Dazman1360
Posts: 27
Joined: Mon Jan 24, 2011 9:51 pm
Location: Milton Damerel, North Devon.
Contact:

Accelerator Pump

#1 Post by Dazman1360 »

Hi,

The accelerator pump on a Solex PSEI carb of a Super Minx isn't working. I have changed the diaphragm & spring and blown through with an air line to ensure no blockages from pump to swan necked jet.

Any other ideas where the problem might be?

Cheers
http://www.triumphherald1360.co.uk

Triumph Herald 13/60 - 1968
Wicksy
Posts: 148
Joined: Fri Feb 18, 2011 5:32 pm
Location: RG42 - UK

Re: Accelerator Pump

#2 Post by Wicksy »

It's likely that the accell chamber is not filling then. A carb strip and clean job to degunge the float chamber passages would be the next step IMO. If you have access to an ultrasonic cleaning bath in a local garage that would be best but copius spraying with carb cleaner and an air jet should get things flowing again.
User avatar
Dazman1360
Posts: 27
Joined: Mon Jan 24, 2011 9:51 pm
Location: Milton Damerel, North Devon.
Contact:

Re: Accelerator Pump

#3 Post by Dazman1360 »

The chamber with the accelerator pump/diaphragm does seem to fill with fuel as when you remove the cover fuel does drop out.....
http://www.triumphherald1360.co.uk

Triumph Herald 13/60 - 1968
Post Reply