Speedo head or cable

Post your technical queries / problems here!
Post Reply
Message
Author
User avatar
Minxy
Posts: 547
Joined: Fri Jan 07, 2011 9:29 pm
Location: West Northamptonshire

Speedo head or cable

#1 Post by Minxy »

OK so I went for a spin in the Minx today and the speedo is getting worse. When I (eventually ) get up to what I estimated to be round 45 -50 the speedo is swinging from around 20 to off the clock @ 80/90 :shock: So any idea is likely to be the head or cable? Not something I ever came across in my days working on cars.
Never play chess with a pigeon. It will knock all the pieces over, S*#t on the board and then strut around pretending it won.
User avatar
JPB
Posts: 10319
Joined: Fri Jan 07, 2011 3:24 pm

Re: Speedo head or cable

#2 Post by JPB »

Hairspring. The one in my Rebel came adrift from where it's anchored on the inside of the movement, resoldering the end of the spring cured the problem.

Here's a picture, the bit circled in red is the anchored end of the spring:
Image

If it continues as it is but doesn't worsen, that'll be the trouble. If it vacillates for a few days more then stops recording entirely, look at the gearbox end of the cable, it may be broken or rounded there.
J
"Home is where you park it", so the saying goes. That may yet come true.. :oops:
suffolkpete
Posts: 1141
Joined: Sun Jan 23, 2011 11:54 am

Re: Speedo head or cable

#3 Post by suffolkpete »

I'd check the cable anyway, withdraw it from the head end and lightly grease it, except for the two inches nearest the head. When replacing it, make sure the connection to the head is done up tightly.
1974 Rover 2200 SC
1982 Matra Murena 1.6
Post Reply